Page 12
Meet PAT™
| Products and Things Pty Ltd |
meetpat.com.au
| Level 1, 419 Townsend Street, Albury, NSW, 2640, Australia
Phone: (02) 60217813, +61260217813 Email: [email protected]
Meet PAT™
| Meet PAT Limited NZ |
meetpat.co.nz
| 12 Bethlehem Road, Bethlehem, Tauranga, 3100
Filter replacement
1
3mm Allen Key
Screws
x 2
Anti
Clockwise
to loosen
2
3
W
ater Flow
Check the water
flow direction on
the
new filter
a
b
Push fit the
correct pipes
into the filter
4
Once the new filter is installed
Connect the unit to a pressurized water
source and check for any leaks.
* If a leak is found turn off the water
supply and check connections.
Disconnect water supply
Disconnect or turn off the water supply.
De-pressure the unit by pushing the buttons
.
First Flush
The first flush of water from the unit will be
Black
in colour.
This is normal and will disappear after a
few seconds of water flow from the unit.
Reset Flow meter after filter change
* See flow meter instructions
Press
down
on
the locking ring
a
b
Pull
up
on the
pipe to remove
* Some models will not
have a bracket
*Once a panel has been removed.
Locate the filter inside the unit
I look like this
3mm Allen Key
Screws
x 2
Clockwise
to tighten
5
