Check tap for pressure
and clean water.
Connect the tap adapter
and drinking hose.
3
1
5
Press all the buttons to flush out any air bubbles
and old water in the lines.
Run all the taps for 10 seconds.
Check for leaks.
If a leak is found turn off the
water and check connections.
Choose suitable location and position the base
Lower the unit in to the base so it clips in place.
Option:
If needed you can fill the base with
water for more stability.
2
4
6
Note: The unit has
to have a drain hose
connected to drain.
Connect the water hose and the drain
hose to either side of the unit.
Turn on the tap.
Set up -
SINGLE bottle Refill or DrinKING fountain
1 300 559 875
+ 61 2 6 02 1 78 1 3
meetpat.com.au