Meech Hyperion 907, Руководство по эксплуатации, Страница: 7 / 20

5
Input Voltage and Connection
„
Installation and connection of the Hyperion 907 Power supply must be completed
by a qualified electrical engineer.
For safety reasons this equipment must be grounded / earthed via the 24V supply or by
direct connection to the earth stud on the case.
Installation
„
The Hyperion power supply should be mounted in ventilated enclosures or in free
air space. The holes in the flange should be used for mounting, it is important that
the power unit is mounted in such a way so oil or moisture from other sources
cannot contaminate the power unit.
„
Failure to the unit through contamination will invalidate the warranty
Ionising Equipment Connection
BEFORE MAKING ANY CONNECTIONS ENSURE THE UNIT IS DISCONNECTED
FROM THE 24V SUPPLY
The 907 Hyperion power supply has 4 ionising appliance connection ports (2 on each
side). Remove the lid of the Hyperion power supply by unscrewing the two retaining
screws. Select the required number of ports, one per appliance, and remove the
necessary amount of grommets from the ports.