Meech CyClean, Руководство по эксплуатации

Страница: 18 / 44

18
Maintenance – Ionisation Equipment
IMPORTANT
Always make safe the electrical and compressed air supplies before undertaking any maintenance work on the CyClean system.
IMPORTANT
Maintenance should only be completed on the CyClean system by those with suitable qualifications.
Ionisers require periodic cleaning. During normal operation, dirt will build-up on the emitter pins and upon the body of the ioniser.
This will cause a reduction in performance.
Typically, weekly cleaning is sufficient. However, equipment used in some heavy contamination areas, such as gravure printing
or where plastic fumes are present, may require daily cleaning. Equally, in a Class 100 area, cleaning may only be required on a
monthly basis.
Advanced systems with performance monitoring, e.g 977cm and 904cm, will alert the operator to the need to clean the equipment
before performance drops to an unacceptable level.
Before cleaning, ensure that the equipment is switched off.
Emitter pins can be cleaned very effectively with a brush. A dry toothbrush is ideal.
Ionising bars will need periodic wiping to clean grey deposits from the surface of the bar. A cloth moistened with a small amount of
IPA or methylated spirits is recommended.
Should you have any additional questions regarding the maintenance of Meech equipment please contact Meech International
directly or your local Meech distributor.
Fault Finding – Ionisation Equipment
Fault finding guides for the Meech Model A905 ionising power supply and A914 AC ionising bars can be downloaded directly from
the Meech website at www.meech.com
For further fault finding guidance please contact Meech International directly or your local Meech distributor.
Maintenance – Vacuum System
Consult the AHU manual for full installation and operation instructions