233v3
Pulsed DC Controller
Issue 2
Page 2
7/12/01
INTRODUCTION
The Meech Model 233v3 Pulsed DC Controller has been designed to power any of
the Meech 200 series range of PDC products.
Unpacking And Inspection
The Model 233v3 Power Supply was carefully packed at the factory in a container
designed to protect it from accidental damage. Nevertheless, we recommend
careful examination of the carton and contents for any damage. If damage is
evident, do not destroy the carton or packing material and immediately notify the
carrier of a possible damage claim. Shipping claims must be made by the
consignee to the delivering carrier.
HOW TO USE YOUR 233v3 CONTROLLER
Model 233v3 Pulsed DC Controller
1. Locate the 233v3 controller in a convenient position near to the ionizing
product
to be powered from it.
2. Following the polarity indicators connect the grey HV plugs of the ionizing
product into the grey HV output sockets of the 233v3 .
3. Connect the 24VDC input supply ( see later) to the controller and switch ON.
The attached ionizer will now produce Pulsed DC ionization from its emitter
pins.
