ENGLISH
53
Installing parallel fence (fig. 7.1–7.2)
Insert the parallel fence slot between the clamping
block and setting tube on the fence and tighten
using the two wing nuts.
There are two possibilities:
too high position, read on the front (fig. 7.1)
too low position, read on the scale at the back (fig.
7.2).
Installation of the cross-cutting scale
(fig. 8)
Align both knurled screws on the fence in
the swivel base and tighten the screws.
The cross-cutting scale can be used to the
left or right of the saw blade in the slot.
Storing the feeder (fig. 9)
Return the feeder to its holder after use.
Содержание 278-445
Страница 61: ......
