Meec 023-024, Инструкция по эксплуатации, Страница: 68 / 78

68
GB
1. Turn the product upside down.
2. Turn the tool socket ring (17)
anticlockwise and remove
the saw blade (23) (if there is
any) (Fig. 1, step 1).
3. Tightly insert the required
saw blade (23) into the tool
socket (16) (Fig. 1, step 2)
then carefully release the tool
socket ring
(17)
(Fig. 1, step
3). Ensure the blade edge
sits properly against the blade
guide (15) .
4. Pull on the saw blade (23) to
test if it sits properly in place.
It should not be possible to
pull it out.
Parallel guide
Attach the parallel guide from
the left or right side to perform
cuts parallel to the workpiece
edges.
1. Loosen the 2 locking
knobs
(14)
(Fig. 2, step 1).
2. Align the parallel
guide (12) with the
brackets (13) and insert
it (12) through them (Fig. 2,
step 2).
3. Use the scale (12a) to
adjust the desired width.
4. Tighten the locking
knobs (14) to secure
the parallel guide (12) in
position (Fig. 2, step 3).
16
23
17
Fig. 1
D A
S
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
cm
Fig. 2 (shown on left side)
14
13
12
A
S
D