![Meec 000-713 Скачать руководство пользователя страница 48](http://html1.mh-extra.com/html/meec/000-713/000-713_operating-instructions-manual_1763358048.webp)
EN
48
USE
Intended use
• The lawn trimmer is not intended for trimming grass. Never use the machine for anything other
than its intended purpose. The machine is only intended for household use.
• The charger must only be used with the type of battery recommended by the manufacturer.
• The machine must only be used for the purpose for which it is intended. All other use is
considered to be unsuitable.
Charge the battery
NOTE:
Charge the battery before using it for the first time and when the tool starts to lose power. The battery
gets warm during the charging. This is completely normal.
1.
Connect the charger to a power point. Only charge at an ambient temperature of 4 - 40°C.
The recommended optimum charging temperature is 24°C.
2.
Plug the charger into a power point. The red status lamp goes on when charging. The green
status lamp goes on when the charger is ready for use.
3.
It takes about 4 hours to fully charge the battery. The status light goes green when the
battery is fully charged.
NOTE:
The battery reaches full capacity only when it has been
charged and discharged several times.
IMPORTANT:
Do not charge the battery immediately after use. Allow the battery to cool before
charging. The status lamp switches from green to red when the battery can be charged.
Inserting/removing the battery
NOTE:
Remove the battery before maintenance, replacing accessories and/or cleaning.
1.
Make sure the power switch is in the OFF position.
2.
Press the battery lock on the end of the battery and remove the battery from the machine.
3.
Align the battery ridges to the slots in the casing, and press the battery in place. Press in the
battery all the way until it clicks into place.
4.
Never attempt to force the battery in place. If it is not easy to press it in place, it is not
properly aligned.
Starting/stopping
1.
Press the start lock and then press the power switch to start.
2.
Release the power switch on the handle to stop.