![Meec 000-713 Скачать руководство пользователя страница 44](http://html1.mh-extra.com/html/meec/000-713/000-713_operating-instructions-manual_1763358044.webp)
EN
44
• After charging, unplug the power cord to the charger and remove the battery
from the charger. Do not leave a battery in the charger.
• Never carry by the power cord. Do not pull the power cord to unplug the plug.
Keep the power cord away from heat, oil and sharp edges.
• Do not attempt to charge non-rechargeable batteries.
• The power cord for the charger cannot be replaced. Do not use the charger if
the power cord or plug are damaged.
• Do not expose the charger to rain or moisture.
• Do not open the charger.
• Do not insert objects into the ventilation openings on the charger.
• The charger is only intended for indoor use.
IMPORTANT:
• To ensure maximum battery life it should always be charged at a temperature
of 18-24°C. Do not charge the battery at temperatures less than 4°C or higher
than 40°C, this can damage the battery.
• The battery will get hot during long periods of use. Allow it to cool for at least
30 minutes before charging.
• The charger and battery can get hot during the charging. This is completely normal.
• The charger should preferably be used at room temperature. Do not cover the
battery charger. Do not charge the battery in direct sunlight or near sources of heat.
• If the battery is not charging properly: (1) Test the power point with a lamp or
other appliance. (2) Move the charger and battery to an area where the
temperature is 18–24°C. (3) If you still have problems, hand in the tool and
charger to an authorised service centre.
• The battery must be charged when it no longer supplies the tool with enough
power. Do not continue to use the tool when the battery no longer supplies the
tool with enough power. Charge the battery according to the instructions. The
battery can be recharged at any time, even if it is not fully discharged.
• Make sure that the charger terminals are not short circuited by any metal
objects when the power cord on the charger is plugged in. Unplug the power
cord when the charger is not in use. Unplug the power cord before cleaning.
• Never immerse the charger in water or any other liquid.
• WARNING: Never allow water to penetrate into the charger – risk of electric
shock. Do not charge batteries in hot areas.