EN
39
• Switch off the machine, unplug the power cord and wait until all moving parts
have completely stopped before carry out maintenance and/or cleaning.
• Be careful when cleaning and carrying out maintenance. NOTE: Wear safety
gloves – risk of personal injury.
• Never modify the safety devices in any way.
• Place the machine on a level, stable surface.
• Do not tilt the machine when the motor is running.
• Do not use the machine on surfaces where ejected material could cause
personal injury.
• Only use the machine in daylight, or in good artificial lighting.
• Always wear ear protection and safety glasses.
• Do not wear loose-fitting clothing, ties, scarves, etc., that can get caught in
moving parts.
General safety instructions for usage
• The infeed funnel must be correctly fitted before use.
• Never put your hands in the infeed or outfeed openings.
• When feeding make sure that no metal, stones, glass, soil, plastic or other
foreign objects get into the machine – this can damage the roller and motor.
Never use the machine for anything other than its intended purpose.
• Switch off the motor immediately if the machine starts vibrating abnormally.
Identify the cause. Vibration usually indicates a problem.
• Allow the machine to cool before checking, adjusting, or putting it away, etc.
• Do not use the machine if the roller is not correctly fitted.
• Before using the machine, check that it is not damaged and that it is working
properly. Check that all the screwed joints and other joint are correctly
tightened and that the guards and screens are in place before starting the
machine. Rectify any faults before using the machine.
• If the roller knocks against a foreign object, or if the machine starts vibrating or
making an abnormal noise, unplug the power cord and wait until all moving
parts have completely stopped:
– Check the machine to see if it is damaged.
– Check and tighten any loose parts.
– Replace or repair any damaged parts with parts of the same type.
Содержание 721-490
Страница 49: ......
