EN
42
ASSEMBLY
Fit the bottom handles
1.
Insert the bottom handles in the holes and make sure they go all the way in (diagram 1).
2.
Lock with the screws on each side.
Fit the top handle, middle handle, and bottom handle.
1.
Place the middle part outside the bottom handle and align the holes. Push in the two bolt
screws, and put a washer on each bolt (diagram 2).
2.
Screw on the wing nuts and tighten by hand.
3.
Slip the power cord holder on the top handle.
4.
Place the middle part outside the top part and align the holes. Push in the two bolt screws,
and put a washer on each bolt.
5.
Screw on the wing nuts and tighten by hand.
6.
After fitting the handles, fasten the power cord in the clip.
2
1
Содержание 721-440
Страница 46: ......
