ENGLISH
30
USE
Always observe the safety instructions and follow them regarding regulations.
Start - Press the green ON button to start the saw
Stop - Press the red OFF button to turn off the saw
TILTING THE TABLE
The figure saw table can be tilted 45°. This is done as follows:
Release the latch handle under the table.
Tilt the table by hand until the desired angle is reached.
The angle can be read from the scale on the machine.
Tighten the latch handle.
ADAPTERS FOR UNIVERSAL SAW BLADES
The supplied adapters should only be used with universal saw blades (= without a pin in the end)
Unscrew the hex screws on the adapter by turning them anti-clockwise
Insert the universal saw blade in the opening between the hex screws
Tighten the hex screws clockwise until the blade is secured
Fitting the saw blade
