Meec tools 040-026, Руководство по эксплуатации

Страница: 35 / 41

SE
35
Before use
• Always check before use that the tool, power cord and plug, including any accessories, are
undamaged
• Do not use the tool if it is damaged
• Always check that all the parts are correctly fitted before use
• Make sure the power switch is in the OFF position before plugging the plug into the mains
supply
• Check that the mains voltage corresponds to the rated voltage on the type plate The mains plug
on the power tool must match the mains outlet
• The tool must only be connected to an earthed mains socket
WARNING! If the power cord or plug are damaged, they must be replaced by authorised service
personnel to ensure safe use
Maintenance
The power tool must only be serviced by qualified service personnel using identical spare parts This
will ensure that the power tool remains safe to use
TECHNICAL DATA
Rated voltage 230 V ~ 50 Hz
Output 1020 W
Speed (no load)
11 500-34 000 rpm
Collet 8 mm
Sound pressure level, LpA 91 dB(A), K=3 dB
Sound power level, LwA 102 dB(A), K=3 dB
Vibration level 41 m/s², K=15 m/s²
Always wear ear protection!
The declared vibration value, which has been measured by a standardised test method, can be used
to compare different tools with each other and for a preliminary assessment of exposure
WARNING! The actual vibration level when using power tools may differ from the specified maximum
value, depending on how the tool is used It is therefore necessary to determine which safety
precautions are required to protect the user, based on an estimate of exposure in actual operating
conditions (taking into account all stages of the work cycle, eg the time when the tool is switched off
and when it is idling, in addition to the start-up time)