Meec tools 029-054, Руководство по эксплуатации, Страница: 30 / 33

EN
30
Recycle discarded battery
in accordance with local
regulations.
TECHNICAL DATA
Rated voltage 10.8 V
Battery 1500 mAh
Charging time 45 min
Chuck Ø 10 mm
Speed no load 0-350 rpm
0-1300 rpm
Max. torque 22 Nm
Drilling capacity Wood: 20 mm
Metal: 8 mm
Weight 1.2 kg
Battery charger 230 V ~ 50 Hz/12 V DC
Sound pressure
level, LpA 67.0 dB(A), K = 3 dB(A))
Sound power
level, LwA 78.0 dB(A), K = 3 dB(A))
Vibration level 1.02 m/s², K = 1.5 m/s²
Always wear ear protection.
The declared vibration value, which has been
measured by a standardised test method, can
be used to compare different tools with each
other and for a preliminary assessment of
exposure.
WARNING: The actual vibration level when
using power tools may differ from the specified
maximum value, depending on how the tool
is used. It is therefore necessary to determine
which safety precautions are required to protect
the user, based on an estimate of exposure
in actual operating conditions (taking into
account all stages of the work cycle, e.g. the
time when the tool is switched off and when it
is idling, in addition to the start-up time).
DESCRIPTION
1. Gear selector
2. Rotation selector
3. Battery lock
4. Battery
5. Power switch
6. Work light
7. Torque selector
8. Chuck
FIG. 1
USE
INTENDED USE
The tool is intended for screw driving and
drilling in wood and metal. The tool,
accessories and battery charger must only
be used in the intended manner and in
accordance with these instructions.
REMOVING AND FITTING
THE BATTERY
1. To remove the battery, press the battery
catches on each side of the battery and
pull out.
2. Fit the battery by aligning the battery to
the slot in the handle and pressing the
battery in place.
3. Check that the battery is firmly in place
before using the tool.
CHUCK
The chuck is fitted with a left-hand screw which
is unscrewed clockwise if the chuck needs to be
removed.