Meec tools 020-180, Руководство по эксплуатации

Страница: 39 / 45

ENGLISH
39

Always use the tools recommended in these Operating Instructions to achieve the best possible
results from the plunge saw.

Always keep your hands away from the work area while the machine is working. Before carrying
out any actions, release the main power switch located on the handle to disconnect the machine.

Always keep your hands away from the work area while the machine is working. Before carrying
out any actions, release the main power switch located on the handle to disconnect the machine.
Intended use
For sawing hard and soft, domestic and exotic tree species, both longitudinally and crosswise, and with
appropriate settings.
Non-intended use
Do not saw iron, steel and cast iron, nor any other materials not mentioned above, and particularly not
food items.
TECHNICAL DATA
Rated voltage 230 V ~ 50 Hz
Output 1200 W
Saw blade Ø 160 mm
Speed 5500 rpm
Cutting speed 55 m/s
Mitre angle 0-45°
Cutting depth 90° 55 mm
Cutting depth 45° 41 mm
Dimensions 340 x 260 x 235 mm
Weight 4.7 kg
Sound pressure level, LpA 95 dB(A), K=3 dB
Sound power level, LwA 106 dB(A), K=3 dB
Vibration level 5,7 m/s², K=1,5 m/s²
Always wear ear protection!
The declared vibration value, which has been measured by a standardised test method, can be used to
compare different tools with each other and for a preliminary assessment of exposure.
Warning: The actual vibration level when using power tools may differ from the specified maximum
value, depending on how the tool is used. It is therefore necessary to determine which safety precautions
are required to protect the user, based on an estimate of exposure in actual operating conditions (taking
into account all stages of the work cycle, e.g. the time when the tool is switched off and when it is idling,
in addition to the start-up time).
DESCRIPTION
See figure 1
1. Handle
2. Front
handle
3. Plunge button
4. Power switch On/Off
5. Guide plate
6. Adjustment screw for cutting depth
7. Cutting depth scale
8. Adjustment screw for mitre sawing
9. Mitre angle scale
10. Adjustment screw for 90°
11. Saw blade
12. Suction support
13. Motor
14. Shaft
lock
15. Adjustment screw for guide rail