EN
29
The declared values for vibration and noise,
which have been measured according to a
standardised test method, can be used to
compare different tools with each other and
for a preliminary assessment of exposure. The
measurement values have been determined in
accordance with EN 62841-2-11:2016.
WARNING!
The actual vibration and noise level when
using tools may differ from the specified
maximum value, depending on how the
tool is used and the material. It is therefore
necessary to determine which safety
precautions are required to protect the user,
based on an estimate of exposure in actual
operating conditions (taking into account all
stages of the work cycle, e.g. the time when
the tool is switched off and when it is idling,
in addition to the start-up time).
DESCRIPTION
Cordless reciprocating saw as part of the Meec
Tools Multiseries 12 V, with rubber coated grips,
battery level indicator and SDS. It also has a
safety lock and holder attachment for more
stable work with one-handed grip. Battery and
battery charger sold separately.
FIG. 1
INTENDED USE
The product is intended for sawing wood,
plastic and building materials against a fixed
stop (base plate). The product is suitable for
rough sawing, straight and curved cuts and
for flush sawing. With a grip support the
product can be used to cut branches. Follow
the instructions for choice of saw blade and
practical tips for sawing. All other use is
considered to be unsuitable. Incorrect use,
inadequate maintenance and/or illicit use of
the product can result in serious personal injury
and/or material damage. The manufacturer
cannot accept liability for personal injury or
material damage resulting from improper use.
The product is only intended for household use.
USE
PRACTICAL TIPS FOR SAWING
• Remove any nails, screws and other metal
objects from the workpiece before sawing,
otherwise there is a risk of personal injury.
• Switch off the product immediately if the
saw blade jams or fastens. Widen the cut
with a suitable tool and pull out the
blade.
• Saw at an even speed.
Accessories/attachments
• Only use the accessories and attachments
specified in the instructions. The use of
accessories or attachments other than
those recommended in these instructions
can result in a risk of personal injury.
• All saw blades with a suitable fixture can
be used (1/2”, 12.7 mm). Saw blades of
different lengths and for different
applications are sold separately.
PREPARATIONS
Charging the battery
WARNING!
Pull out the charger plug from the power
point before the battery is connected to, or
disconnected from the charger.
NOTE:
Charging temperature: 10 to 40°C. Check the
battery charge status at regular intervals if
the product has not been used for some time.
The optimum charge is 50 to 80%. Store the
tool in a dry place. Storage temperature: 0
to 50°C.
Содержание 019799
Страница 4: ...1 3 4 2 ...
Страница 5: ...6 7 5 ...
