Meec tools 019231, Руководство по эксплуатации

Страница: 26 / 63

EN
26
• Check that the product is clean and free
from contamination.
• Follow all the directions for care,
maintenance and storage.
• Check the power cord and plug at regular
intervals. If the power cord or plug get
damaged they must be replaced by an
authorised electrician.
• Check any extension cords are regular
intervals. Replace damaged extension cords.
• Keep the handles clean, dry and free from
oil and grease.
• Always unplug the product when it is not
in use, before service and maintenance,
and before changing tools.
• Avoid accidental starting. Check that the
power switch is in the OFF position before
plugging the plug into a power point.
• Always use the correct type of extension
cord.
• If the product is used outdoors, only use an
extension cord approved for outdoor use.
• Stay alert at all times. Use your common
sense. Never use the product if you are
tired or under the influence of drugs,
alcohol or medication.
• Check that the product is undamaged.
• Check before using the product that it is
working normally as described in these
instructions.
• Check that all moving parts are
undamaged, correctly fitted and that they
do not jam.
• Damaged safety devices must be replaced
by an authorised service centre, unless
otherwise specified in the instructions.
• A damaged power switch must be
replaced by an authorised electrician.
• Do not use the product if it cannot be
switched on and off with the power
switch.
• Do not use accessories other than those
specified in these instructions or
recommended by the manufacturer or
retailer – risk of personal injury.
SAFETY INSTRUCTIONS
• Keep the work area clean and tidy.
Cluttered work areas put safety at risk.
• Do not expose the product to rain or
moisture.
• Do not use the product in damp or wet
areas.
• Keep the work area well lit.
• Do not use product where combustible
gas or liquids are stored or used.
• Avoid the risk of electric shock. Do not
touch earthed objects, such as water
pipes, radiators, hot plates or cookers.
• Keep other people and pets at a safe
distance.
• Persons not involved in the work should
be kept at a safe distance from the work
area and do not allow anyone, especially
children, to touch the product or the
power cord.
• When not in use, store the product in a
dry place, locked up and out of the reach
of children.
• Do not overload the product. The work
will be safer and better if the product is
not overloaded.
• Wear suitable clothing. Do not wear
loose-fitting clothing or jewellery. They
can get caught in moving parts.
• Wear non-slip shoes when working
outside.
• Wear a hair net if you have long hair.
• Use personal safety equipment.
• Wear safety glasses.
• Wear a breathing mask or dust filter mask
if the work produces a lot of dust.
• Protect the power cord from damage, and
replace a damaged cord immediately.
• Do not pull the power cord to unplug the
plug from the power point. Keep the
power cord away from heat, oil and sharp
edges.
• If the power cord or plug get damaged
they must be replaced by an authorised
electrician.