EN
24
TROUBLESHOOTING
WARNING!
Risk of personal injury. Repairs must only be carried out by qualified personnel, otherwise there is
a risk of personal injury, material damage and/or damage to the environment.
The troubleshooting table below describes some of the most common faults and how to rectify them.
Check the following points before contacting the retailer for a service.
Problem
Cause
Action
The soldering tip does not get
hot.
No power supply.
Check that the power point is
supplied with voltage and that
the plug is correctly plugged in.
The power cord or plug is
damaged.
Take the product to an
authorised service centre to
replace the power cord.
The solder does not spread
uniformly over the soldering
tip.
The working temperature is
too low.
Set a higher working
temperature.
The soldering tip is loose.
Switch off the product, allow
it to cool and tighten the
soldering tip.
Содержание 018680
Страница 3: ...1 ...
Страница 4: ...2 3 4 ...
