EN
24
Always wear ear protection.
The declared values for vibration and noise,
which have been measured according to a
standardised test method, can be used to
compare different tools with each other and
for a preliminary assessment of exposure. The
measurement values have been determined in
accordance with EN 62841-2-11:2016.
WARNING!
The actual vibration and noise level when
using tools may differ from the specified
maximum value, depending on how the
tool is used and the material. It is therefore
necessary to determine which safety
precautions are required to protect the user,
based on an estimate of exposure in actual
operating conditions (taking into account all
stages of the work cycle, e.g. the time when
the tool is switched off and when it is idling,
in addition to the start-up time).
DESCRIPTION
1. Saw blade
2. Sole
3. Blade holder
4. Lock ring
5. Locking screws
6. Power switch On/Off
7. Power switch lock (locks power switch in
On position)
FIG. 1
INTENDED USE
The reciprocating saw is a hand-held power
tool with a tensioned saw blade that by virtue
of its movement back and forwards saws
through different materials. Sharp curves
and wavy lines can be sawn in thin sheets or
boards. The reciprocating saw can be used to
saw in wood, metal, plastic and other similar
materials with the specified dimensions.
Only use the designated saw blades.
SYMBOLS
The following symbols can be of importance for
how you should use your power tool. Make sure
you understand the symbols and their significance.
Read the instructions.
Wear ear protection.
Wear safety glasses.
Wear a dust filter mask.
This product has a safety class
II rating. This means it is fitted
with extra or double insulation.
Approved in accordance with
the relevant directives.
Recycle discarded product in
accordance with local regulations.
TECHNICAL DATA
Rated voltage, frequency
230 V ~ 50 Hz
Output 710 W
Stroke rate (no load)
0-2800 /min
Stroke length
20 mm
Max cutting capacity in wood
115 mm
Max cutting capacity in plastic
115 mm
Max cutting capacity in steel
3 mm
Sound pressure level, LpA
83 dB(A), K=5 dB
Sound power level, LwA
94 dB(A), K=5 dB
Vibration*, ah,B
19.439 m/s², K=1.5 m/s²
Vibration, support handle, ah,B
15.084 m/s2, K=1.5 m/s²
Vibration**, ah,WB 22.104 m/s², K=1.5 m/s²
Vibration, support handle, ah,WB
13.319 m/s², K=1.5 m/s²
Cord length
2 m
Safety class
II
Weight
2.2 kg
* Sawing in fibreboard. ** Sawing in solid wood.
Содержание 017682
Страница 4: ...1 2 3 2 1 6 7 1 2 3 4 5 4 ...
Страница 5: ...3 5 2 4 ...
