Meec tools 011392, Руководство по эксплуатации

Страница: 28 / 33

EN
28
completely stopped before checking,
adjusting, maintenance and/or replacing
accessories, and before putting into
storage. Allow the product to cool before
checking, adjusting, maintenance or
replacing accessories, and before putting
into storage.
• Be careful when working near the roller
and the fixed blade. The roller can move
even when the motor is not running.
• Be careful when cleaning and/or carrying
out maintenance. Wear safety gloves –
risk of cut injuries.
• Allow the product to cool before putting
into storage.
ELECTRICAL SAFETY
• Check that the rated voltage of the
product corresponds to the mains supply
voltage.
• The product must be connected to the
mains supply with a residual current
device with a maximum tripping current
of 30 mA.
• Only use an extension cord approved for
outdoor use. Extension cords up to 25 m
must have a cross-sectional wire area of at
least 1.5 mm², and extension cords longer
than 25 m a cross-sectional area of at
least 2.5 mm². If an extension cord is used
on a reel, pull out the full length of cord.
Check the power cord for damage.
• Do not pull the power cord to pull out the
plug. Keep the power cord away from
heat, oil and sharp edges.
SYMBOLS
Read the instructions.
WARNING!
Wear safety glasses and ear
protection.
Wear safety gloves.
Disconnect the product from
the mains supply when leaving
the product unattended.
Disconnect the product from
the mains supply before
making any adjustments or
before servicing.
Protect the product from
moisture and water.
Keep onlookers, especially
children, and pets at a safe
distance when using the
product. Risk of personal
injury as a result of parts being
ejected. Keep at a safe distance.
Risk of ejected objects.
The minimum safe distance for
onlookers is 15 metres when
the product is in use.
WARNING! Rotating roller.
Keep your hands and feet
at a safe distance when the
machine is running.
Moving parts continue to move
after the motor has been
switched off. Wait until all
moving parts have completely
stopped before making any
adjustments.