19
•
Keep children under supervision to make sure they do not play with the tool.
•
Pay attention to what you are doing at all times, and use your common sense. Never use power tools
if you are tired or under the influence of drugs, alcohol or medication.
•
Do not overreach. Always maintain a firm footing and good balance. Be careful when working on
ladders or scaffolding etc.
•
Switch off the tool and wait until all moving parts have completely stopped before putting down the
tool.
•
Switch off the tool immediately and unplug the power cord in the event of an electrical or mechanical
fault.
After use
•
Switch off the tool and unplug the power cord.
•
Never leave the tool outdoors.
•
Store the tool in a dry place, out of the reach of children.
TECHNICAL DATA
Power consumption
1200
W
Voltage/frequency
230 VAC, 50 Hz
Speed (no load)
600–3300 rpm
Max. diameter polishing pad/disc
180 mm
Certification
CE, GS, EMC, RoHS
Insulation
Sound pressure level, L
pA
86 dB(A), K=3 dB
Sound power level, L
wA
97 dB(A), K=3 dB
Vibration level
7.9 m/s², K=1.5 m/s²
Always wear ear protection.
The declared vibration value, which has been measured by a standardised test method, can be used to
compare different tools with each other and for a preliminary assessment of exposure.
WARNING:
The actual vibration level when using power tools may differ
from the specified total value,
depending on how the tool is used. It is therefore necessary to determine which safety precautions are
required to protect the user, based on an estimate of exposure in actual operating conditions (taking into
account all st
ages of the work cycle, e.g. the time when the tool is switched off and when it is idling, in
addition to the start-up time).
Содержание 010007
Страница 21: ......
