Meec tools 008314, Руководство по эксплуатации

Страница: 29 / 30

EN
29
the tool is switched off and when it is idling, in
addition to the start-up time).
DESCRIPTION
1. Battery holder
2. Power switch
3. Motor housing
4. Snow screw
5. Lock knob, for locking top and bottom tube
6. Lock knob, for adjusting support handle
7. Support handle
8. Start inhibitor
FIG. 1
ASSEMBLY
ASSEMBLY OF TOP AND BOTTOM
TUBE
1. Press the cable in the tube and push the
bottom tube in the top tube.
2. The screw holes should be opposite
each other so that the screw easily goes
through. Make sure that the cable does
not catch in the screw holes.
3. Fix the top and bottom tube by inserting
the supplied screw through the holes and
tightening with the knob.
FIG. 2
USE
INSERTION AND REMOVAL OF
BATTERY
• Push the battery in the battery holder.
Make sure the battery clicks in place.
• The battery is removed by pressing the
lock button on the battery. Pull out the
battery.
STARTING AND SWITCHING OFF
1. Check before starting and using the
machine that all the parts are properly
fastened, that there are no tools on the
machine, that the handle is fixed and the
battery charged.
2. Start the machine by pushing forward
the start inhibitor and then pressing the
power switch.
3. The start inhibitor can be released when
the machine starts.
4. Switch off the machine by releasing the
power switch.
5. Start the battery powered shovel by
pushing forward the small lock button
(safety switch) on the top handle and
pressing the start button at the same time.
The battery powered shovel keeps working
when the start button is pressed in.
6. After starting the machine, release the
safety switch. Switch off the machine by
releasing the power switch.
SNOW CLEARING
1. First check that there are no stones,
rubbish, wires or other objects in the area
where the snow is being cleared.
2. Check that all the assembly parts (nuts
and screws etc.) are firmly tightened
so that the machine is in safe working
condition.