Meec tools 007341, Руководство по эксплуатации

Страница: 33 / 36

EN
34
AIR HOSE
FIG. 2
NOTE:
Switch off the compressor and pull out the
plug before connecting or disconnecting the
air hose.
Connection
The compressor has two quick-couplings to
connect an air hoses.
1. Press in the coupling part of the air hose
in the quick-coupling.
2. Check that the air hose is properly
connected.
Disconnection
1. Press in the coupling part of the air hose
further into the quick-coupling.
2. Move back the sleeve on the quick-
coupling.
3. Pull out the coupling part of the air hose
from the quick-coupling.
4. Release the sleeve.
SETTING THE WORKING PRESSURE
The set working pressure is shown on the
pressure gauge. Never exceed the maximum
permitted working pressure for the connected
equipment.
• Turn the adjuster knob to the right to
increase the pressure.
• Turn the adjuster knob to the left to
decrease the pressure.
USE
1. Check that the air tank is relieved of
pressure and that any accumulated liquid
has been drained out.
necessary to determine which safety
precautions are required to protect the user,
based on an estimate of exposure in actual
operating conditions (taking into account all
stages of the work cycle, e.g. the time when
the tool is switched off and when it is idling,
in addition to the start-up time).
DESCRIPTION
1. Handle
2. Connection for air hose
3. Wheel
4. Air tank
5. Pressure regulator
6. Power switch
7. Safety valve
8. Pressure gauge, tank pressure
9. Pressure gauge, output pressure
10. Air filter
11. Oil filler cap
12. Level indicator
13. Water drain valve
14. Overheating protection
FIG. 1
ASSEMBLY
Unpack the product and check that all the
parts are included and are not damaged. Fit
the supplied wheels. Remove the plastic covers
by the pumps and fit the air filters.
WARNING!
Keep the packaging materials out of the
reach of children – risk of suffocation.