Meec tools 006299, Руководство по эксплуатации

Страница: 20 / 21

EN
20
TECHNICAL DATA
Rated voltage 230 V
Output 1200 W
Suction power
20 kPa
Volume 18 L
Range 6.9 m
Hose length 1.9 m
Cord length 5 m
Size Ø300 x H370 mm
Weight 4.35 kg
DESCRIPTION
1. Handle
2. Power switch
3. Top section
4. Container lid
5. Intake opening
6. Metal hose
7. Aluminium tube
8. Button to clean filter
9. Lock device
10. Container
11. Filter mode switch
12. Motor unit
13. Air intake, motor (metal)
14. HEPA filter
15. Protective grille
16. Screw for HEPA filter
FIG. 1
ASSEMBLY
FITTING THE HEPA FILTER
Fit the HEPA filter on the underside of
container lid and lock in place with the screw
for the HEPA filter.
1. Container lid
2. HPA filter
3. Protective grille
4. Screw for HEPA filter
FIG. 2
NOTE:
Tighten the screw so that the rubber part on
the HEPA filter is firmly pressed against the
red filter mode switch, otherwise the ash
vacuum will not start.
Fitting accessories
Connect the metal hose and aluminium tube
to the container.
FIG. 3
USE
HOW TO USE
1. Plug in the plug.
2. To start the ash vacuum, put the power
switch in position I.
3. Put the end of the tube in the stove to be
emptied of ash.
4. Gently sweep the tube over the ash to
vacuum it up.
5. Put the power switch in position O to
switch off.
Less suction power
• If the suction power diminishes or the ash
vacuum is less effective, this could be
because the HEPA filter is clogged.
• Pressure five times or more on the button
to clean the filter.
FIG. 4
MAINTENANCE
1. Switch off the ash vacuum and pull out
the plug.