Meec tools 001-177, Руководство по эксплуатации, Страница: 50 / 54

EN
50
Lawn mowing
1. Set the required mowing height.
2. Start the engine according to the
instructions and allow it to run.
3. Hold the top handle and engine control
lever in a firm grip and push the lawn
mower forward.
FIG. 13
WARNING!
• Failure to follow all the instructions and
safety instructions can result in the risk
of serious personal injury. Read all the
instructions and safety instructions
carefully before use.
• Never open the ejector flap when the
engine is running and if the grass
catcher is not fitted. The lawn mower
blades can cause serious personal injury.
• Use the machine carefully. Never run
with the lawn mower. Be very careful on
uneven surfaces.
• Mow across slopes, never up and down.
• Be very careful when changing direction
on slopes.
• Do not mow very steep slopes.
NOTE:
• The best results are obtained when the
grass is dry. Wet grass can block the
blades and the catcher system.
• Grass grows at different rates,
depending on the season. Always use
the lowest mowing height setting when
mowing for the first time at the start of
the season, or when the grass is very dry.
• Do not mow more than 1/3 of the height
of the grass.
• Do not mow high or wet grass. During
the mowing, switch off the lawn mower
at regular intervals to clear the blades
and mower deck.
• Do not use your hands or feet to clear
the blades and deck. Use a brush, broom
or other suitable tool.
Emptying the grass catcher
When cuttings fall onto the lawn behind the
machine it is time to empty the grass catcher.
1. Lift up the ejector flap with one hand, grip
the grass catcher handle with the other,
and lift out the grass catcher. When the
grass catcher is removed the ejector flap
falls down and closes the ejector opening.
2. Empty the grass catcher and replace.
NOTE:
• Switch off the engine and wait until all
moving parts have completely stopped
before removing the grass catcher.
• Remove any residual grass in the ejector
opening with a brush. Do not use your
hands or feet to clear the blades and
deck. Use a brush, broom or other
suitable tool. The grass catcher will not
work properly if the mower deck or
ejector opening are blocked by grass.
MAINTENANCE
WARNING!
Switch off the lawn mower and wait until all
moving parts have completely stopped before
carrying out maintenance and/or cleaning.
• Always clean the lawn mower after use.
• Do not allow grass and other debris to dry
on the surfaces of the lawn mower.
• Dry, adhered grass and other debris can
prevent the lawn mower from working
properly.
• Check that the ejector is free from residual
grass and clear if necessary. Check the
underneath of the lawn mower and the
attachment of the blade. Put the lawn
mower on its right side (the opposite side
to the oil filler cap).