7
MULTIPOINT
Multipoint allows two Bluetooth devices to be connected to the Wave
simultaneously. Both devices will need to be paired before multipoint can be
used.
Multipoint Pairing
To use two Bluetooth devices with the Wave, first pair them by following the
pairing procedure described in the
Pairing with Bluetooth devices
section for
each device and then turn off the headset.
When turned on again, the Wave will automatically attempt to connect to the
2 most recently-paired devices, as long as they have Bluetooth enabled and
are within range. If a device that has already been paired does not connect
automatically, select “Air-Fi Wave” from the Bluetooth menu of the device.
If you no longer wish to connect to multiple devices, disable Bluetooth on the
device you do not want connected to the Wave or remove the “Air-Fi Wave”
pairing from the Bluetooth menu of the device.
Multipoint Functionality
Status
Function
Operation
Media playing
on one device Play media on other device
Pause audio playback on the active
device and start audio playback on the
other connected device*
*It may take up to 10 seconds for audio to switch
Incoming calls will always take precedence over media. If media is playing
on one device and an incoming call is received on the other device, the Wave
will pause the media on the active device and activate the device with the
incoming call. Once the call is ended, the Wave will reactivate the original
device and resume playback (with most media applications).
For phone call controls, see the
Controlling Phone Calls
section.