10
SETUP (Continued):
PAIRING WITH BLUETOOTH HEADPHONES
Optional: Replace Paired Headphone
Once the maximum of two connected headphones has been reached
(as indicated by two solid blue lights on top of the
Connect
), additional
headphones or other Bluetooth receivers can be paired in place of either
of the connected headphones.
Follow the instructions found in the “Pairing a 2nd Headphone” section to
replace one of the currently-paired headphones with a new device. Use
pairing button “A” to replace the headphone paired in slot A and pairing button
“B” to replace the headphone paired in slot B.
SUBSEQUENT USE –
RECONNECTING HEADPHONES
The
Connect
will stay connected until either the unit or headphones are
turned off or taken out of range. It is not necessary to turn off the
Connect
or headphones after each use except to conserve battery (note: when the
Connect
is plugged into USB power, it does not use the battery).
Previously paired Bluetooth headphones will reconnect to
Connect
automatically once turned back on. The
Connect
will not initiate
reconnection. If the
Connect
itself is turned off, it is recommended to turn it
back on first before turning on the paired headphones so that it can accept
the incoming Bluetooth connection from the headphones. If the headphones
are already on, turn them off and then on again.
Note:
It may take up to 60 seconds for audio transmission to start after
headphones re-connect.
