INSTRUCTION MANUAL
- 17 -
HCSMD400
Measuring
120s
SpO
2
%
100
090
100
060
98
PR
70
bpm
Deleted all data
YES
NO
OK
12:00
Back
Fig.4-8
4.5 System Setting
Pick and enter the [System Setting] interface from the main menu. And then press the
Navigation buttons to select different item to set.
Measuring
120s
%
100
090
100
060
98
70
bpm
Page 01/80
System Setting
Alarm Volume
Back
12:00
Alarm Pause
Beep Tone
Backlight Setting
Language
Screen Sleep Mode
5
120s
5
5
Measuring
120s
%
100
090
100
060
98
70
bpm
Page 01/80
System Setting
01
Back
12:00
Charging management
ID setup
Factory Default
Fig. 4-9 Fig. 4-10
Alarm Volume:
you can adjust the value of alarm volume, there are 7 levels, and the default
level is 3.
Alarm Pause:
there are two modes,60s and 120s, and the default mode is 120s. The device
audibly alarm upon new alarm conditions.
Beep Tone:
the level is from 0 to 7, and the default level is 3.
Backlight Setting:
the level of brightness is from 1 to 7, and the default level is 3.
Language:
English, French, German, Spanish, Italian, Japanese, Russian and Chinese.
Screen Sleep Mode:
1minute, 10 minutes, 30 minutes, screen always on, and the default is
1minutes
Charging management:
Charging Activated, Charging stop.
ID setup:
①
press OK button,
②
press Navigation button to change the number,
③
press OK
button to confirm.
Factory Default:
recover to factory reset.
