background image

1. Do not use the device if the power cable or plug is damaged.
2. Do not insert any sharp or pointed object through the ventilation holes of the device.
3. Do not let unauthorized personnel to play with the device.
4. Do not immerse the device in water, or allow water or any fluids to enter through the ventilation holes.
5. When removing the power plug, always hold the plug and never pull the cable.
6. Do not remove the power plug when your hands are wet.
7. Remove the power plug from the wall socket before cleaning the device.
8. Do not modify, disassemble or repair this device without proper training unless stated in the manual.
9. Do not replace the electric plug or cut the power cable. Replacing the plug or cutting the power cable in any way will   

 

     immediately cause the Warranty to become void. Any subsequent fault in the operation of the device will not be covered by the  
     Warranty, and repair and servicing will be chargeable. 
10. If the power cable is damaged, contact an authorized Medklinn Service Centre for repairs immediately. 
11. Do not attempt to open the inner compartment of the device. The device requires minimal maintenance, and no servicing or  
       repairs are to be carried out by the User. Opening the device or tampering with it in any way will cause the Warranty to become  
 

void. If you encounter any problems with the device, please contact the nearest authorized Medklinn Service Centre.

12. Do not wipe the device with benzene or paint thinner.

SAFETY PRECAUTIONS

FOR FURTHER ASSISTANCE, PLEASE CALL OUR CUSTOMER SERVICE.

WARNINGS

 - 

To reduce the risk of electrical shock, fire or injury:

1.

Содержание O3 Hydro 10

























Отзывы: