MedKlinn Home Asens+ 20 Скачать руководство пользователя страница 4

2

If the unit should cause interference to radio or television reception, try to correct the interference by one or more of the following 

measures:

 

Reorient or relocate the receiving antenna.

• 

Increase the distance between the unit and radio/TV receiver.

• 

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• 

Consult the dealer or an experienced radio/TV technician for help.

NOTE - RADIO OR TV INTERFERENCE:

1.  Place the unit at least 6 feet from radio, television or electronic equipment. This is to minimize the possibility of interference with  

  the equipment or the remote controller.

2.  Do not cover the unit in any way at all, particularly the ventilation holes. Doing so will cause excessive heat build-up and may  

  result in a fire and irreparable damage to the unit.

3.  Avoid placing the unit where curtains or other furnishings may cover the ventilation holes. 

4.  Avoid placing the unit in oily environments as it may cause the cartridge to be coated with a thicker layer of grease/debris.  

  Hence, affecting its performance.

5.  Ensure that there is free flow of air around the unit.

6.  Avoid locations where the unit is exposed to condensation due to rapid and drastic temperature fluctuations. The unit should  

  only be used in temperatures between 5º-35ºC. 

7.  Effective cleaning by active oxygen requires adequate air exchange as they are created from oxygen. Regular air exchange  

  will take place if the door or window is opened occasionally. 

8.  Do not use in small enclosed spaces where there is no or poor air circulation e.g. in wardrobes, closets or pantries. 

9.  Active oxygen is very reactive, and there may be some loss of paint from poorly painted surfaces. To minimize this,  

 

     do not place the unit directly against walls or other painted surfaces, and leave a space of at least one (1) foot from these  

 surfaces.

10.  It is NOT recommended to place the unit directly too close to pets.

CAUTIONS DURING OPERATION

Содержание Home Asens+ 20

















Отзывы: