MEDIZS Smart LC-13, Руководство по эксплуатации

Страница: 7 / 37

7
▪When liquid has been spilled into the instrument or a metal object has
entered through an opening.
▪When the product has been dropped or its housing damaged.
WARNING
Never disassemble or modify this instrument because it may result in fire or
electric shock. Also, since this instrument incorporates high-voltage parts and
other hazardous parts, touching them may cause death or serious injury.
WARNING
IT devices used to connect a USB A / B connector must comply with the
IEC60601-1 or IEC60950-1 standard.
WARNING
Devices to prevent damage to the electrical shock should be connected to the
power supply with the protective earth.
WARNING
Be sure to perform Wait until cool enough to heat the lamp replacement lamp.
Do not touch the lamp with bare hands ten thousand and one against. It can
cause severe burns.
WARNING
Do not Keep way the place where the temperatures very much.
2-4. General Safety Information
1. This instrument is used with accessories from MEDIZS Inc. If consumer would like to use the
accessories from other manufacturers, safety of accessories should be verified and identified by
manufacturer or by MEDIZS Inc.
2. Operation Manual should be kept at the place where the user can easily access.
3. When moving this instrument, please keep vibration or impact away from the equipment. It can bring
some damage inside or outside of the instrument. Please carefully handle the instrument.
4. In case there is smoke, strange odor or noise on working, disconnect the power supply and consult
the dealer.
5. To connect this instrument with other relevant equipment, consult with the dealer about the way to
make it.
6. Don’t use organic solution such as alcohol, thinner, benzene, etc. to clean the surface of this
instrument. It may damage the instrument.
7. Do not arbitrarily disassemble or modify this instrument.