Manual
Page
13
of
26
Rev.
02
(2010
‐
05
‐
06)
Manual_M530_Rev02.doc
Medite GmbH . Wollenweberstr. 12 . D-31303 Burgdorf/Germany
Tel. +49 (0) 51 36/88 84-0 . Fax +49 (0) 51 36/88 84-55 . [email protected] . www.medite.de
3.3 Adjustment By Operator Panel
3.3.1 Section Counter And Object Feed Position
The following information is shown on the
Meditome display:
With every cut movement of the object
clamp one step is added on the section
counter.
By pushing the “Reset counter” key above
the display, the counter is set to “0” again.
The value of the section counter is shown
in the first line of the display.
Another indication shows the current
position of the object clamp. (“0” is
completely back, the value counts up when
the feed starts moving towards the knife)
The actual value can be found at the
bottom of the display.
Object feed forward
Object feed backward
Trim
Automatic
Retraction
Reset counter
Memory keys for
object feed values
Section
counter
Position of
object feed
Memory
values
Turn and
push button
