Medistore ProCair 3000, Руководство пользователя

Страница: 13 / 16

13
Maintenance & Cleaning
Control unit
WARNING: Ensure the Control Unit
is disconnected from the mains electricity
supply before cleaning.
WARNING: DO NOT spray disinfectant
directly on to the Control Unit, or immerse
in any type of liquid. This could result in a
severe electrical hazard as this equipment
has no protection against ingress of water.
WARNING: This equipment is not
suitable for use in the presence of a
flammable anesthetic mixture with air or
with oxygen or nitrous oxide.
External cleaning
Wipe down Control Unit with warm water
containing detergent (or with a solution
of Sodium Hypochlorite or similar), dry
thoroughly before use.
Air Filter Replacement
1. Switch off the power supply to the
Control Unit.
2. Disconnect the power cord and
air hoses.
3. Place the Control Unit on a flat
surface with its back panel uppermost
(NOTE: be sure to place soft cloth under
unit to prevent scratches).
4. Carefully pry off the cover of the air
filter, remove and discard the filter
material and fit new (there may be a
small locking screw – use a small Philips
head to remove this first).
5. Refit the air filter cover to the Control
Unit. The Control Unit is now ready for
re-connection.
NOTE: Good filter maintenance is critical to
maintain your system in optimal operating
condition. Failure to keep the filters
clean will result in system downtime and
increase repair costs. It is recommended
that the air filter be replaced annually.
Air filters are available from a Medistore
Service Centre. Preventative inspection and
calibration is not required.
Fuse Replacement
1. Ensure the Control Unit is deactivated.
2. Remove the power cord from the
electrical socket on the side of the
Control Unit.
3. Using a small flat head screwdriver
insert into the grove and turn
anti-clockwise (¼ turn).
4. Remove the “blown” fuse from the fuse
holder clip and discard.
5. Insert a new fuse into the plug. Push
against the force of the spring and turn
clockwise with the screwdriver a ¼ turn.