12
Maintenance & Cleaning
Infection Control and routine cleaning
must be carried out in accordance with
your local Infection Control Policy.
It is suggested that all disinfection
be done with a high grade
disinfectant in accordance with
manufacturer’s instructions.
WARNING:
Do not use high
temperature autoclave, or use
Phenolic based products for cleaning.
IMPORTANT:
It is recommended the
system is cleaned between patients
and approximately every two weeks if
in constant use.
Overlay Top Cover
Washing and Disinfecting
If there are visible signs of body fluids
and/or substances present, top covers
should be washed. Top covers can be
machine washed (up to 70°C) using
disinfectant according to manufacturer’s
instructions. To determine the amount of
disinfectant to use, determine the amount
of water in the washer and then follow the
manufacturers’ instructions for dilution.
Soak the Top Cover in the disinfectant
during the wash cycle. Rinse well in clean
water and dry thoroughly before use.
CAUTION:
Do NOT dry the Top Cover
using the HEAT cycle or a dryer. Air dry or
select a low or NON heat dry cycle.
Washing Alternative
If there are no visible signs of body fluids
and/or substances on the top cover, it can
be sanitised.
1. Apply an intermediate level disinfectant
(or a solution of Sodium Hypochlorite
or similar up to 10,000 ppm available
chlorine) to the Top Cover upper
surface either by spraying or by
hand application.
2. Ensure the surface is completely covered
with the disinfectant and remains in
contact with the surface according to
manufacturer’s instructions.
3. Remove disinfectant and
rinse thoroughly.
4. Allow to air dry before use.
Outside Shell
Wipe down with disinfectant (or a solution
of Sodium Hypochlorite or similar up to
10,000 ppm available chlorine), ensuring
that all surfaces come in contact with the
disinfectant. Rinse off well with a clean
damp cloth and air dry.
Air Cell Assembly
CAUTION:
DO NOT machine wash or
dry the air cells. The air cell assembly does
not routinely need to be cleaned
or disinfected.
IMPORTANT:
DO NOT disassemble the
overlay, unless cleaning is required.
If cleaning or disinfecting is required,
DO NOT disconnect the hoses from the
air cells.
Содержание ProCair 3000
Страница 1: ...User Guide ProCair 3000...
