16
3 Operating / 4 Miscellaneous
GB
1. Connect the power plug to a mains socket.
2. Turn on the device by pressing the on-/off button
6
.
3. Press timer button
7
.
> UV light bulbs get switched on and light up.
> LED „90 Sec“ indicates a 90 seconds operation time.
• If you press timer button
7
again, operation time is increased: 120
seconds, 30 minutes, 60 minutes. LED
1
,
2
,
4
and
5
indicate your
choice.
4. There are three ways to switch
off
light:
a. While beeing in mode “permanent operation”, press timer button
7
.
(To switch the lamps back
on
press
7
again.)
b. UV light bulbs automatically get switched off when timer has elapsed.
(To switch the lamps back
on
press
7
again.)
c. Press on-/off button
6
to switch off the device completely.
> The device is only switched off completely if power indicator LED
3
goes out. Disconnect the power plug from the mains socket.
3 Operating
NOTE
For choosing operating time observe instructions of the
acrylic liquid or gel manufacturer.
4.1
How to
replace
uv light
bulbs
• Disconnect the power plug from the mains socket and wait for the
device and uv light bulbs to cool down.
• Pull the extendable baseplate
0
out the device.
• Pull the uv light bulb
8
out of the lamp socket
9
. Pess the new uv
light bulb into the socket until it audibly clicks into place.
• Push the extendable base plate
0
back into the device.
4 Miscellaneous
