Medisana MCN PRO, Инструкция по эксплуатации

Страница: 31 / 130

21
GB
3 Operating
Next this program is shown with reverse directions of rotation and middle
vibration intensity level. Closing the demo program massage in the seat is
activated once more showing highest vibration intensity level. The LEDs schow
the current massage regions and functions. The device will stop once all
functions worked.
Neck button
9
Adjust the massage heads to the desired height by turning wheel
3
.
Switch on the device by pressing O
n/Off button
t
.
Neck button
9
is for the neck/shoulder reversible kneading massage. Press this
button once, left massage head
2
is kneading counterclockwise; right massage
head
2
is kneading clockwise. Press it a second time, directions change. Press
button
9
a third time, neck massage stops.
Back buttons
0 q w
Switch on the device by pressing O
n/Off button
t
.
Select the region you wish to massage with the back massage button (
0
/
q
/
w
) .
Full button
0
(full back)
The Shiatsu massage heads
4
move from the “Park” position at the base of
the backrest, up to the shoulder area, massaging the back in a circular motion
whilst doing so. Once the uppermost position has been reached, the direction
of rotation of the massaging heads is reversed. The heads then travel down to
the base of the backrest. Once the heads reach this point, the direction of
rotation is reversed again and then travel up the back again.
Upper button
q
(upper back)
The Shiatsu massage heads
4
travel up and down the upper half of the back
in a circular motion. The reversal of the direction of rotation takes place when
the respective end positions are reached.
Lower button
w
(lower back)
The Shiatsu massage heads
4
travel up and down the lower half of the back
in a circular motion. The reversal of the direction of rotation takes place when
the respective end positions are reached.
Heat button
e
The heat function can be activated at any time with the shiatsu massage,
during which the vibration massage can also be activated. Press the heat
button
e
to activate the function; the LED on the control unit and the
massage heads light up red. The heat is radiated through the massage heads
4
. Press the button
e
again to de-activate the heat function; the LED and
the red light of the massage heads go out.