Medisana 85202, Руководство пользователя

Страница: 18 / 86

14
3 Operating / 4 Miscellaneous
GB
4.1
Cleaning and
maintenance
BIKINI LINE
The epilator can safely be used for trimming the bikini line. If the hair in this
area is too long (normal if it has not been removed for some time), first careful-
ly shorten it with scissors or a beard trimmer. During epilating stretch the skin
tightly with your free hand and possibly extend the leg to prevent the formati-
on of skin folds during epilating.
HOW OFTEN?
At first, carry out epilation about once a week. Hair removal at short intervals
contributes to a weakening of the hair and keeps the skin smooth.
For persons with sensitive skin, weekly epilation is recommended as a matter
of principle. Epilation at even shorter intervals makes the process even gentler
and takes only a few minutes.
AFTER USE
To relax and soothe the skin after epilating, you may apply a moisturiser, aloe
vera lotion or a disinfecting aftershave lotion.
• Regular cleaning and care of the unit ensures the best results and extends
the life of the unit.
• Ensure that the unit is switched off and that the mains adapter has been
disconnected from the socket before cleaning the unit.
• Clean the unit with a dry soft cloth.
• Do not use any strong detergents for cleaning, e.g. scouring cream or other
cleansing agents, as they may damage the surface of the unit.
• When cleaning, never immerse the unit in water and make sure that no
water gets into the unit.
• Do not wrap the cable around the unit.
• Store the unit in its bag in a dry, cool place.
Cleaning of the epilating head

1. Remove the epilating head cover

by pressing on the lock

and re-
move the epilating head

by gently pressing on it with the thumb.
2. Remove all hair residue between the epilating disks (tweezer pairs) and
inside the epilating head using the cleaning brush

supplied.
3. Use a few drops of cleaning alcohol and a cotton bud to remove any other
residue from the tweezer pairs.
NOTE
Do not use any fluids other than alcohol to clean the unit.
4. Refit the epilating head

by pressing it onto the unit until it engages.
Ensure that the gearwheel on the epilating head engages into the
gearwheel in the unit.
5. Refit the epilating head cover

.
6. Refit the protective cap

.