Getting Started
- 18 -
Getting Started
The software on this PC comes
fully pre-installed
. You do not have to load any of the
CD's/DVD’s supplied.
With many programs (e.g., telephone-CD's or encyclopaedias), however, it is necessary to
insert the corresponding CD/DVD in order to call up the data which is stored on it. The
software will ask you to do this as necessary. Once you have made all the connections and
secured the necessary connectors you can turn on the monitor, the other peripherals and
finally the PC itself.
Step 1: Inserting batteries in keyboard
The keyboard requires two alkaline batteries (LR6/AA, 1,5V).
1.
Turn the keyboard over and open the battery compartment.
2.
Insert two batteries (LR6/AA, 1,5V). Ensure that the polarity corresponds to the illus-
tration (+ must correspond with + and – with –).
3.
Shut the battery compartment.
Note
The operation of the keyboard is described on page 31.
Step 2: Connecting the keyboard and power on
1.
Connect the USB receiver to a USB connection of your All-In-One PC.
2.
Set the switch under the keyboard to ON.
Important!
Switch the keyboard off by means of the on/off switch, if you will not be us-
ing it for a longer period, to avoid the unnecessary consumption of the bat-
teries.
Step 3: Power on
1.
Connect the mains adapter supplied to the All-In-One PC.
Then, connect the mains cable to the adapter and connect it subsequently to a
socket.
2.
Press the on/off switch on the front once, to switch on your All-In-One PC.
Содержание The Touch X9613
