![Medion S89047 Скачать руководство пользователя страница 83](http://html.mh-extra.com/html/medion/s89047/s89047_instruction-manual_1761864083.webp)
84
5. Device
Overview
1
2
3 4
2
1
5
6
7
8
9
6
5
1) Wheelhouse
2) Footboard
3)
Battery charge display
4)
LED balance sensor
5) Tyres
6)
LED battery display
7) Housing
8)
Charging connector (on reverse side)
9)
On/Off switch (on reverse side)
6. Preparations for Use
Remove all packaging materials.
6.1. Charge the E-Scooter battery
The battery charge display in the centre of the E-Scooter shows the battery charge
level:
If the LED is shining blue:
battery is more than 50% charged.
If the LED lights is shining
red/you hear a signal
tone:
battery has less than 20% charge, and must be
charged.
Stop using the E-Scooter if the LED lights up.
The E-Scooter is switched off.
Make sure the charging connector is clean.
Connect the charging cable, with the 3-pin plug on it, to the charging connector
on the rear of the E-Scooter.
Connect the battery charger to a power supply.
The LED flashes orange when the battery is charging.
87779 MULI-Otto MSN 50056915-6-7 Content Final REV3.indb 84
87779 MULI-Otto MSN 50056915-6-7 Content Final REV3.indb 84
01.02.2018 13:08:00
01.02.2018 13:08:00