16 of 24
Telephone:
1300 884 987
Internet: www.medion.com.au
After Sales Support
5. Start of operation
5.1. Putting the Soundbar into operation
The Soundbar runs on the mains adapter supplied.
5.1.1. Connecting the mains adapter
Connect the plug on the mains adapter (Dongguan Guanjin Electronics Co., Ltd
K42A210190A) to the DC socket on the Soundbar.
The mains adapter needs a connection cable (supplied with the product). Put
the cable into the mains adapter socket and the plug into a wall socket.
5.2. Putting the subwoofer into operation
The subwoofer runs on the integrated mains cable.
Insert the mains plug into a wall socket.
5.3. Inserting the batteries in the remote control
The remote control is supplied with a CR2025 3V lithium battery already inserted.
NOTE
When you use the remote control for the first time, pull out the
transparent strip marked "Please remove before use" without opening
the battery compartment.
The battery needs to be changed if the product fails to respond or is slow to
respond to the remote control. Proceed as follows to change the battery:
Press the catch (1) and remove the battery holder
complete with battery (2) from the remote
control. Comply with the legal requirements
when disposing of the used battery.
Insert a new CR2025 3V battery in the holder
with the positive terminal facing upwards. Always
make sure the battery is the right way round.
Push the battery holder complete with battery
back into the remote control as far as it will go.
CAUTION
Risk of explosion if batteries are replaced incorrectly. Replace
batteries only with the same or equivalent type.
2025
CR 2025
CR 2025
84510 EN Aldi AUS Content RC5.indd 16
84510 EN Aldi AUS Content RC5.indd 16
19.03.2014 09:04:47
19.03.2014 09:04:47
