26 of 64
Telephone:
1300 884 987
Internet: www.medion.com.au
After Sales Support
11. The Optical Drive
Product Diagram position:
O
11.1. Loading and Removing a Disc
Unlike optical drives on a desktop PC, the All-In-One PC uses a mount to hold the
disc.
ATTENTION!
Do not use scratched, broken, dirty or poor quality discs. The high speeds
in the drive can cause these to break destroying your data and damaging
your device. Inspect discs carefully before inserting them. If damage or dirt
is visible, do not use the disc. Damage caused by faulty media is not covered
under warranty and repairs will be chargeable.
Incorrectly positioning the disc in the mount can cause it to be damaged
when closing the drive drawer.
11.1.1. Loading a Disc
With the device switched on, press the eject button on the optical drive to open
the drawer.
Pull the tray out completely with care.
Place the disc on the tray so that it lays flat with the label facing forward. push
the disc right onto the locking mechanism so that it can lock in position.
ATTENTION!
The disc can be damaged when the drive drawer is pushed in, if it has not
been positioned on the support correctly.
Push the tray back into the optical drive carefully.
The ‘E’ drive letter will have been allocated to your optical drive in the delivery
status. You will have easy access to your files on your disks with Windows
Explorer (Computer). Start the Computer Help Program by means of the
Desktop link or by pressing the Windows key and the ‘E’ key at the same time.
ATTENTION!
While the All-In-One PC is accessing the optical drive the media activity
indicator (Diagram reference A4) is lit. Do not try to remove the disc from
the drive while this LED is lit.
8806 Aldi AUS RC2 Content.indd 26
8806 Aldi AUS RC2 Content.indd 26
07.11.2012 12:06:49
07.11.2012 12:06:49
