Start of operation
14
Inserting the batteries in the remote
control
Insert 2 Mignon AAA 1.5 V LR 03 batteries (not supplied) in
the remote control.
`
Open the battery compartment by pushing the lid
catch in the direction of the arrow.
`
Insert the batteries so that the negative end is placed
next to the springs.
`
Close the battery compartment.
Insert batteries in the unit
Insert 3 Mignon AAA 1.5 V LR 03 batteries (not supplied) in
the unit. The batteries are used to store data in case of a
power cut.
`
Open the battery compartment by pushing the lid
catch in the direction of the arrow.
`
Insert the batteries so that the negative end is placed
next to the springs.
`
Close the battery compartment.
Aerial connection
The aerial socket input (
FM ANT
) is on the left side of
the appliance. Here you can connect the player to
the aerial socket using a 75 Ohm aerial cable (not
provided).
The player has a wire aerial for VHF which needs to be
adjusted for optimum reception.
The player has a built-in directional ferrite antenna
for MW reception. You may therefore need to turn
the player to improve reception.
