Medion MD 81777, Руководство пользователя

Страница: 79 / 150

36
T
HE UNIVERSAL REMOTE CONTROL
Safety instructions
Do not repair the device yourself
The universal remote control has a class 1M infrared diode. Do not
examine the laser with optical instruments!
Do not subject your remote control to dust, strong sunlight, moisture,
high temperatures or strong vibrations.
Do not use any corrosive or aggressive cleaning products.
Scope of application
This universal remote control can operate the following types of devices:
TV
Television
DVD
DVD player MD 81777
SAT, AUX
Other devices (e. e. analogue satellite receivers, other DVD
players, loudspeakers, tuners, etc.). The label indicates the
device type to be programmed. It is used to provide an
easier overview.
Programming device codes
General information
Programming of the remote control does not work in DVD mode.
For every device that you would like to operate using the universal remote
control, you must program a three-digit device code to a source key (
TV
,
SAT
,
AUX
). You can assign any key to any device (”flex mode”) with the
exception of the TV button, which can only be assigned one television.
Video recorder: Perform the code search when a video is in the machine.
Enter the device code according to the code list
The codes of the corresponding devices can be found in the Code List
enclosed with these operating instructions. Proceed as follows:
1. Switch the relevant device on manually.
2. Keep the
CODE
key pressed for approx. 3 seconds until the red LED
remains solid.
3. Briefly press the required souce key(
TV
,
SAT
,
AUX
).
4. Enter the four-digit code from the Code Table.
The key lighting will extinguish briefly each time the key is pressed.
If the entered code was valid, the light of the source key will extinguish
after the last digit has been entered. If an invalid code was entered, the red
LED flashes for three seconds before extinguishing.