14
Code identification
Code identification gives you the opportunity to determine codes that
have already been entered and stored in the remote control. Proceed
as follows:
1. Switch the relevant device on manually.
2. Keep the
S (SETUP)
key pressed down for approx. 3 seconds, the
background lighting of the source key will flash for a short time
and then remain permanently lit. (Briefly pressing the SETUP key
will activate the SHIFT function.)
3. Briefly press the desired source key (
TV, VCR, DVD, CD, CBL,
ASAT, DSAT, AUX)
.
4. Briefly press the SETUP button. The source key will briefly extin-
guish after the key has been pressed.
5. To find the first number, press the number keys from 0 to 9. If the
source key extinguishes briefly, then it is the first stored number.
6. To determine the second number, press the number keys again
from 0 to 9. Repeat the procedure for the third number.
7. The source key will extinguish as soon as the button for the third
number has been pressed.
Code identification has now been completed.
Univ-FB_MD80383_AUS.fm Seite 14 Dienstag, 24. Januar 2006 8:57 08
