Mounting
Attach the stand as shown in the illustration. Carry out this step before connecting the Smart TV.
1
2
3x
3x
Inserting batteries in the remote control
− Remove the battery compartment cover on the back of the remote control.
− Insert two LR03/AAA/1.5 V batteries in the battery compartment of the remote control. Check the battery
polarity (see label on the bottom of the battery compartment).
− Close the battery compartment.
NOTICE!
Risk of damage!
The remote control can be damaged by leaking batteries if not used for a long period of time!
− Remove the batteries from the remote control if the device is not going to be used for a long
period.
Connecting the antenna
Your smart TV processes different antenna signals.
You can input the following image signals to the television through the socket labelled
ANT.
10
:
• Via analogue cable/an analogue house aerial
• Via a DVB-T2/ DVB-T
1
antenna or
• Via a DVB-C
1
connection (digital cable connection)
− Insert the antenna cable either from the house aerial/analogue cable connection, a DVB-T antenna or the
DVB-C connection in the antenna socket on the Smart TV.
1
This service must be available in your region.
20
Getting started
