6
Inserting alkaline batteries
`
Remove the lid of the battery compartment at the rear of
the unit.
`
Insert two batteries 1,5 V, size AA, LR6.
Observe the po/- !
`
Close the battery compartment.
Charging NiCd batteries
You can operate the unit with two rechargeble NiCd- batte-
ries 1.2 V, size AA, LR6.
`
In order to make the batteries rechar-
geable, remove the coating at the ne-
gative pole of one of the rechargeable
batteries.
`
When inserting the batteries, make
sure that the blank part of the battery
touches the recharge contact.
`
Insert the other rechargeable battery,
observing the polarity, and close the
battery compartment.
When using the rechargeable batteries
for the first time or after a long period of time, they must be
recharged. To do so, only use the supplied AC adaptor.
`
Connect the AC adaptor to the unit and to an AC
power outlet.
`
Put the
CHARGE
switch on the position
ON
and
press
STOP
. The display shows
C
and a graphic
charge indicator.
When the batteries were completely empty, charging time
takes appr. twelve hours. The display goes out when the
batteries are charged.
`
Disconnect the AC adaptor and put the
CHARGE-
switch
on
OFF
.
CD-Porti-MD2601.book Seite 6 Donnerstag, 15. Mai 2003 9:33 09
