Medion LIFE P62024, Руководство пользователя

Страница: 59 / 296

58
Test station memory
In some types of vehicle the default assignment of the permanent plus and alternat-
ing plus has been exchanged by the factory for the ISO block A in the ISO plug. This
means that the station memory does not work.
Before finally inserting the car radio, use the following procedure to check whether the
stations stay saved:

Re-connect the car battery.

Switch the vehicle's ignition on.

Switch the radio on.

Save stations automatically by holding down the
A S / P S
button for around two
seconds (see „Automatic search for the 6 strongest stations (APS)“ on page 67).

Switch the vehicle's ignition off.

Switch the ignition on again and test whether the stations are still saved (to do so
press the station buttons
1
to
6
).

If the stations have been saved you can insert the radio.

If the stations are no longer saved you should use an adapter, available from speci-
alist retailers, or arrange for a specialist workshop to modify the cables. In this case
refer to the „Information on the cables“ on page 60section.
Using the car radio

Push the car radio carefully into the slot until it clicks into place.
NOTE!
When inserting the radio make sure that the cables are not bent, squashed
or pulled tight.

Then put the cover frame on the radio.
83296 ML eCommerce Content RC1.indb 58 83296 ML eCommerce Content RC1.indb 58 15.03.2012 16:47:01 15.03.2012 16:47:01