EN
29
8.2.4. Settings
menu
Settings
Conditional Access
Language
Parental
Timers
Recording Configuration
Date/Time
Sources
Network Settings
Other Settings
Menu Item
Settings
CONDITIONAL
ACCESS
If you would like to watch pay channels, you must subscribe to a corresponding provider. After
subscribing, your service provider will provide you with a conditional access module (CA mod-
ule) and a special card. Information about the settings can be found in the documentation
supplied with the module.
Install the CI components in your TV as follows:
Switch the TV off and pull out the plug.
Insert the CI module into the slot on the side of the LCD TV. Afterwards, insert the card.
PLEASE NOTE!
Please note that you should only insert or remove the CI module when the device is
disconnected from power.
WARNING!
The CI module must be inserted the right way round; it cannot be pushed
in the wrong way round. The CI module or TV set could be damaged if
you try to insert the CI module with force.
Connect the TV to the power supply, switch it on and wait a moment until the card is de-
tected.
Some CI modules require additional setup steps, which you can perform in the
CONDI-
TIONAL ACCESS
menu.
If no module is inserted, the message “
NO COMMON INTERFACE MODULE DE-
TECTED
” appears on the screen.
Содержание LIFE P17102
Страница 1: ...106 4 cm 42 LCD LED Backlight TV MEDION LIFE P17102 MD 30911 Instruction Manual ...
Страница 55: ...54 ...
Страница 56: ...1 M ...