59
DE
EN
ES
NL
FR
IT
SI
12.1. Setting the alarm
All operating buttons for this setting are located on the bot-
tom of the device. You can set two alarm times.
Press the
M
button once or twice to select alarm 1 or 2
on the display. This is represented by the bell symbols.
Press
S
to access alarm setting mode. The hours flash.
Use
V
or
V
to select the required hour.
Press
S
to confirm. The minutes flash.
Use
V
or
V
to select the required minutes.
Press
S
to confirm. The minutes display for the length of
the snooze function flashes.
Use
V
or
V
to select the required snooze duration (5, 10,
15, 20, 25, 30 minutes).
Then press
S
to confirm.
The alarm has been set.
12.2. Activating/deactivating the alarm
In time mode, press the
M
button once or twice to se-
lect the alarm 1 or 2 on the display. This is represented
by the bell symbols.
Press
V
or
V
to activate or deactivate the alarm. The fol-
lowing symbol is shown on the display:
– Alarm deactivated
– Alarm activated
After confirming the setting, press
M
to return to time
mode.
Alternatively you can repeatedly press on top to
the device for 1.5 seconds to select Alarm 1 on,
Alarm 2 on, Alarm 1 & 2 on, all alarms off in a loop.
