68 of 82
22.2. Connecting with the PC
Press the On/Off button to start your navigation system.
Connect the USB cable to your navigation system.
Push the USB connector into a free USB port on your computer.
The following screen will appear after the navigation system has been
connected:
Mass storage
mode
ActiveSync®
mode
PLEASE NOTE!
The ActivSync® mode will be loaded automatically after a few seconds, if
no mode has been selected.
Select the desired mode:
22.2.1. Mass Storage mode
You will be able to use your navigation device as a detachable device (e.g. a USB
stick) in the Mass Storage mode. Two drives, the internal memory of the navigation
system itself and the (optional) memory card, if it has been inserted into the device,
will be connected to do this.
PLEASE NOTE!
No further entries can be made on the device at the same time if you
are in this mode. Use the ‘Remove hardware safely’ function of your
operating system to protect yourself against data loss. Now, remove the
cable from your navigation system.
The Hardware Installation Assistant will now recognize a new device and will install
a suitable driver. This can take several minutes.
E4x70 Generic EN Gopal 7.0 Final Content.indd 68
E4x70 Generic EN Gopal 7.0 Final Content.indd 68
12.12.2012 14:16:17
12.12.2012 14:16:17
Содержание GoPal E4x70
Страница 1: ...10 92 cm 4 3 Navigation System MEDION GoPal E4x70 Instruction Manual...
Страница 83: ...82 of 82...